Telit Wireless Solutions LE910 - Page 407

Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 407 of 509
Mod. 0808 2011-07 Rev.2
<protocol> - string that represents the protocol
<cid> -
cid of the PDP context to be used for the specified protocol
Note: values are automatically saved in NVM.
AT#PROTOCOLCFG?
Read command returns the current settings in the format:
#PROTOCOLCFG: "FTP",1,0,0,0<CR><LF>
#PROTOCOLCFG: "SMTP",1,0,0,0<CR><LF>
#PROTOCOLCFG: "PING",1,0,0,0<CR><LF>
#PROTOCOLCFG: "SSL",1,0,0,0<CR><LF>
#PROTOCOLCFG: "HTTP",1,0,0,0<CR><LF>
AT#PROTOCOLCFG =?
Test command returns the range of supported values for all the
parameters.