Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 94 of 509
Mod. 0808 2011-07 Rev.2
SIM PUK2 - ME is waiting SIM PUK2 to be given; this <code> is returned only
when the last executed command resulted in PUK2 authentication
failure (i.e. +CME ERROR: 18)
PH-NET PIN - ME is waiting network personalization password to be given
PH-NET PUK -
ME is waiting network personalization unblocking password to be
given
PH-NETSUB PIN - ME is waiting network subset personalization password to be
given
PH-NETSUB PUK - ME is waiting network subset personalization unblocking
password to be given
PH-SP PIN - ME is waiting service provider personalization password to be given
PH-SP PUK - ME is waiting service provider personalization unblocking
password to be given
PH-CORP PIN - ME is waiting corporate personalization password to be given
PH-CORP PUK - ME is waiting corporate personalization unblocking password to
be given
Note: Pin pending status at startup depends on PIN facility setting, to change or
query the default power up setting use the command
Test command returns OK result code.
OK
AT+CPIN?
+CME ERROR: 10 error: you have to insert the SIM
AT+CPIN?
+CPIN: READY you inserted the SIM and device is not waiting for PIN to be given
To Next Page
Loading...
Need help?
General
