Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 98 of 509
Mod. 0808 2011-07 Rev.2
+CIND - Indicator Control
<state> - registration state
0 - the indicator is deregistered; there’s no unsolicited result code (+CIEV URC)
automatically sent by the ME to the application, whenever the value of the
associated indicator changes; the value can be directly queried with +CIND?
1 - the indicator is registered: an unsolicited result code (+CIEV URC) is
automatically sent by the ME to the application, whenever the value of the
associated indicator changes; it is still possible to query the value through
+CIND? (default)
Note: When the ME is switched on all of the indicators are in registered mode.
Read command returns the current value of ME indicators, in the format:
+CIND: <ind>[,<ind>[,…]]
Note: the order of the values <ind>s is the same as that in which the associated
indicators appear from test command AT+CIND=?
Test command returns pairs, where string value <descr> is a description (max. 16
chars) of the indicator and compound value is the supported values for the indicator,
in the format:
+CIND: ((<descr>, (list of supported <ind>s))[,(<descr>, (list of supported
<ind>s))[,…]])
where:
<descr> - indicator names as follows (along with their <ind> ranges)
“battchg” - battery charge level
<ind> - battery charge level indicator range
0..5
99 - not measurable
“signal” - signal quality
<ind> - signal quality indicator range
0..7
99 - not measurable
“service” - service availability
<ind> - service availability indicator range
0 - not registered to any network
1 - registered
“sounder” - sounder activity
<ind> - sounder activity indicator range
0 - there’s no any sound activity
1 - there’s some sound activity
“message” - message received
<ind> - message received indicator range
0 - there is no unread short message at memory location “SM”
1 - unread short message at memory location “SM”
“call” - call in progress
<ind> - call in progress indicator range
0 - there’s no calls in progress
1 - at least a call has been established
To Next Page
Loading...
Need help?
General
