Cisco Catalyst 3650 Series

The MANUAL_BOOT environment variable can also be reset by using the no boot manual global
configuration command.
The BOOT environment variable can also be reset by using the no boot system global configuration command.
The ENABLE_BREAK environment variable can also be reset by using the no boot enable-break global
configuration command.
The HELPER environment variable can also be reset by using the no boot helper global configuration
command.
The CONFIG_FILE environment variable can also be reset by using the no boot config-file global configuration
command.
Examples
This example shows how to unset the SWITCH_PRIORITY environment variable:
Device: unset SWITCH_PRIORITY
Related Commands
DescriptionCommand
Sets or displays environment variables.
set
Performs a hard reset on the system.
reset
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
981
unset