Cisco Catalyst 3650 Series User Manual

show platform resources
To display platform resource information, use the show platform reources command in privileged EXEC
mode.
show platform resources
This command has no arguments or keywords.
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.1.1
Usage Guidelines
The output of this command displays the used memory, which is total memory minus the accurate free memory.
Examples
The following is sample output from the show platform resources command:
Switch# show platform resources
**State Acronym: H - Healthy, W - Warning, C - Critical
Resource Usage Max Warning Critical
State
----------------------------------------------------------------------------------------------------
Control Processor 7.20% 100% 90% 95%
H
DRAM 2701MB(69%) 3883MB 90% 95%
H
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
100
show platform resources

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)