Cisco Catalyst 3650 Series

show autonomic l2-channels
To display the results of Channel Discovery, use the show autonomic l2-channels command in privileged
EXEC mode.
show autonomic l2-channels
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Examples
To display the results of Channel Discovery:
Device# show autonomic l2-channels
AN L2 Channel Discovery Info :
Nbr UDI Encap Our Intf State Retry
--------------------------------------------------------------------------------
PID:WS-C3850-24U SN:FCW1934D05Z 4018 Gi1/0/3 Active 1
To display more detailed information:
Device# show autonomic l2-channels detail
AN L2 Channel Discovery Info :
--------------------------------------------------------------------------------
Nbr UDI : PID:WS-C3850-24U SN:FCW1934D05Z
ANI Intf : ANI1
Encap : 0
Nbr Intf : GigabitEthernet1/0/3
Our Intf : GigabitEthernet1/0/3
Keepalives Missed : 0
Channel Status : Active
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
899
show autonomic l2-channels