redistribute mdns-sd
To redistribute services or service announcements across subnets, use the redistribute mdns-sd command.
To disable redistribution of services or service announcements across subnets, use the no form of this command.
redistribute mdns-sd
no redistribute mdns-sd
This command has no arguments or keywords.
Command Default
The redistribution of services or service announcements across subnets is disabled.
Command Modes
mDNS configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
To redistribute service announcements across interfaces, use the redistribute mdns-sd command. This
command sends out unsolicited announcements received on one interface to all of the other interfaces. The
outgoing announcements are filtered as per the out-service policy defined for the interface or in absence of a
per-interface service policy based on the global out-service policy.
In the absence of a redistribute option, services can be discovered by querying in a Layer 3 domain that is not
local to the service provider.
Examples
This example shows how to redistribute services or service announcements across subnets:
Device(config-mdns)# redistribute mdns-sd
If redistribution is enabled globally, global configuration is given higher priority than interface configuration.Note
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
245
redistribute mdns-sd
To Next Page
Loading...
Need help?
General
