Cisco Catalyst 3650 Series User Manual

clear lacp
To clear Link Aggregation Control Protocol (LACP) channel-group counters, use the clear lacp command
in privileged EXEC mode.
clear lacp [channel-group-number] counters
Syntax Description
(Optional) Channel group number. The range is 1 to 128.
channel-group-number
Clears traffic counters.counters
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
You can clear all counters by using the clear lacp counters command, or you can clear only the counters for
the specified channel group by using the clear lacp channel-group-number counters command.
Examples
This example shows how to clear all channel-group information:
Device# clear lacp counters
This example shows how to clear LACP traffic counters for group 4:
Device# clear lacp 4 counters
You can verify that the information was deleted by entering the show lacp counters or the show lacp
channel-group-number counters privileged EXEC command.
Related Commands
DescriptionCommand
Displays LACP channel-group information.
show lacp
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
291
clear lacp

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)