Cisco Catalyst 3650 Series User Manual

show ip ports all
To display all the open ports on a device, use the show ip ports all in user EXEC or privileged EXEC mode.
show ip ports all
Syntax Description
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Everest 16.5.1a
Usage Guidelines
This command provides a list of all open TCP/IP ports on the system including the ports opened using Cisco
networking stack.
Examples
The following is sample output from the show ip ports all command:
Device#
show ip ports all
Proto Local Address Foreign Address State PID/Program Name
TCB Local Address Foreign Address (state)
tcp *:4786 *:* LISTEN 224/[IOS]SMI IBC server process
tcp *:443 *:* LISTEN 286/[IOS]HTTP CORE
tcp *:443 *:* LISTEN 286/[IOS]HTTP CORE
tcp *:80 *:* LISTEN 286/[IOS]HTTP CORE
tcp *:80 *:* LISTEN 286/[IOS]HTTP CORE
udp *:10002 *:* 0/[IOS] Unknown
udp *:2228 10.0.0.0:0 318/[IOS]L2TRACE SERVER
The table below describes the significant fields shown in the display
Table 14: Field Descriptions of show ip ports all
DescriptionField
Transport protocol used.Protocol
Device IP Address.Local Address.
Remote or peer address.Foreign Address
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
194
show ip ports all

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)