Cisco Catalyst 3650 Series

debug fabric auto
debug fabric auto{trace| level| {error| verbose}}
Syntax Description
Enables the tracing for the commands auto-generated when the fabric-auto
command is executed.
trace
Displays the errors encountered during Fabric Overlay provisioning.level error
Displays the maximum number of messages encountered during Fabric Overlay
provisioning.
level verbose
Command Default
None.
Command Modes
Privileged Exec
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Usage Guidelines
Use these debug commands to troubleshoot your fabric domain configuration, and trace the commands
auto-generated by the fabric auto command, and display the errors encountered.
The no debug fabric auto level verbose command disables the display of all the messages encountered
during fabric provisioning.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
18
debug fabric auto