Cisco Catalyst 3650 Series User Manual

show interfaces
To display the administrative and operational status of all interfaces or for a specified interface, use the show
interfaces command in privileged EXEC mode.
show interfaces [interface-id| vlan vlan-id] [accounting| capabilities [module number]| debounce|
description| etherchannel| flowcontrol| private-vlan mapping| pruning| stats| status [err-disabled]| trunk]
Syntax Description
(Optional) ID of the interface. Valid interfaces include physical
ports (including type, stack member for stacking-capable switches,
module, and port number) and port channels. The port channel
range is 1 to 48.
interface-id
(Optional) VLAN identification. The range is 1 to 4094.
vlan vlan-id
(Optional) Displays accounting information on the interface,
including active protocols and input and output packets and octets.
The display shows only packets processed in software;
hardware-switched packets do not appear.
Note
accounting
(Optional) Displays the capabilities of all interfaces or the specified
interface, including the features and options that you can configure
on the interface. Though visible in the command line help, this
option is not available for VLAN IDs.
capabilities
(Optional) Displays capabilities of all interfaces on the switch or
specified stack member.
This option is not available if you entered a specific interface ID.
module number
(Optional) Displays the administrative status and description set
for an interface.
description
(Optional) Displays interface EtherChannel information.etherchannel
(Optional) Displays interface flow control information.flowcontrol
(Optional) Displays private-VLAN mapping information for the
VLAN switch virtual interfaces (SVIs). This keyword is not
available if the switch is running the LAN base feature set.
private-vlan mapping
(Optional) Displays trunk VTP pruning information for the
interface.
pruning
(Optional) Displays the input and output packets by switching the
path for the interface.
stats
(Optional) Displays the status of the interface. A status of
unsupported in the Type field means that a non-Cisco small
form-factor pluggable (SFP) module is inserted in the module slot.
status
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
77
show interfaces

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)