Cisco Catalyst 3650 Series

Command Default
The default is src-mac.
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
You can verify your setting by entering the show running-config privileged EXEC command or the show
etherchannel load-balance privileged EXEC command.
Examples
This example shows how to set the load-distribution method to dst-mac:
Device(config)# port-channel load-balance dst-mac
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
321
port-channel load-balance