Cisco Catalyst 3650 Series User Manual

mgmt_init
To initialize the Ethernet management port, use the mgmt_init command in boot loader mode.
mgmt_init
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Boot loader
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use the mgmt_init command only during debugging of the Ethernet management port.
Examples
This example shows how to initialize the Ethernet management port:
Device: mgmt_init
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
932
mgmt_init

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)