Cisco Catalyst 3650 Series

match non-client-nrt
To match non-client NRT (non-real-time), use the match non-client-nrt command in class-map configuration
mode. Use the no form of this command to return to the default setting.
match non-client-nrt
no match non-client-nrt
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Class-map
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
None
Examples
This example show how you can configure non-client NRT:
Device(config)# class-map test_1000
Device(config-cmap)# match non-client-nrt
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
650
match non-client-nrt