Cisco Catalyst 3650 Series User Manual

vmps reconfirm (global configuration)
To change the reconfirmation interval for the VLAN Query Protocol (VQP) client, use the vmps reconfirm
global configuration command. To return to the default setting, use the no form of this command.
vmps reconfirm interval
no vmps reconfirm
Syntax Description
Reconfirmation interval for VQP client queries to the VLAN Membership Policy Server
(VMPS) to reconfirm dynamic VLAN assignments. The range is 1 to 120 minutes.
interval
Command Default
The default reconfirmation interval is 60 minutes.
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
You can verify your setting by entering the show vmps privileged EXEC command and examining information
in the Reconfirm Interval row.
Examples
This example shows how to set the VQP client to reconfirm dynamic VLAN entries every 20 minutes:
Device(config)# vmps reconfirm 20
Related Commands
DescriptionCommand
Displays the VQP version, reconfirmation interval, retry count, VMPS
IP addresses, and the current and primary servers.
show vmps
Immediately sends VQP queries to reconfirm all dynamic VLAN
assignments with the VMPS.
vmps reconfirm (privileged EXEC)
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
1061
vmps reconfirm (global configuration)

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)