Cisco Catalyst 3650 Series User Manual

(Optional) Displays WCCP related information.wccp
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was enhanced to
display of the outputs of the
following commands in the output
modifier :
•
show power inline
•
show platform software
ilpower details
•
show power inline police
•
show stack-power
budgeting
Cisco IOS XE Denali 16.3.2
This command was reintroduced.Cisco IOS XE Denali 16.1.1
Usage Guidelines
The output from the show tech-support command is very long. To better manage this output, you can redirect
the output to a file (for example, show tech-support > filename ) in the local writable storage file system or
the remote file system. Redirecting the output to a file also makes sending the output to your Cisco Technical
Assistance Center (TAC) representative easier.
You can use one of the following redirection methods:
•
> filename - Redirects the output to a file.
•
>> filename - Redirects the output to a file in append mode.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
125
show tech-support

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)