show ip pim mdt bgp
To show details about the Border Gateway Protocol (BGP) advertisement of the route distinguisher (RD) for
the multicast distribution tree (MDT) default group, use the show ip pim mdt bgp command in user EXEC or
privileged EXEC mode.
show ip pim [vrf vrf-name] mdt bgp
Syntax Description
(Optional) Displays information about the BGP
advertisement of the RD for the MDT default group
associated with Multicast Virtual Private Network
(MVPN) routing and forwarding (MVRF) instance
specified for the vrf-name argument.
vrf vrf-name
Command Modes
User EXEC Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.2
Usage Guidelines
Use this command to show detailed BGP advertisement of the RD for the MDT default group.
Examples
The following is sample output from the show ip pim mdt bgpcommand:
Device# show ip pim mdt bgp
MDT-default group 232.2.1.4
rid:10.1.1.1 next_hop:10.1.1.1
The table below describes the significant fields shown in the display.
Table 19: show ip pim mdt bgp Field Descriptions
DescriptionField
The MDT default groups that have been advertised
to this router.
MDT-default group
The BGP router ID of the advertising router.rid:10.1.1.1
The BGP next hop address that was contained in the
advertisement.
next_hop:10.1.1.1
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
395
show ip pim mdt bgp
To Next Page
Loading...
Need help?
General
