Cisco Catalyst 3650 Series User Manual

flow record
To create a Flexible NetFlow flow record, or to modify an existing Flexible NetFlow flow record, and enter
Flexible NetFlow flow record configuration mode, use the flow record command in global configuration
mode. To remove a Flexible NetFlow record, use the no form of this command.
flow record record-name
no flow record record-name
Syntax Description
Name of the flow record that is being created or modified.
record-name
Command Default
A Flexible NetFlow flow record is not configured.
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
A flow record defines the keys that Flexible NetFlow uses to identify packets in the flow, as well as other
fields of interest that Flexible NetFlow gathers for the flow. You can define a flow record with any combination
of keys and fields of interest. The supports a rich set of keys. A flow record also defines the types of counters
gathered per flow. You can configure 64-bit packet or byte counters.
Examples
The following example creates a flow record named FLOW-RECORD-1, and enters Flexible NetFlow flow
record configuration mode:
Device(config)# flow record FLOW-RECORD-1
Device(config-flow-record)#
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
432
flow record

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)