show location
To display location information, use the show location command in privileged EXEC mode.
show location {detail mac-addr| plm| statistics| summary rfid| rfid {client| config| detail MAC-addr|
summary}}
Syntax Description
Displays detailed location information with the RSSI table for a particular
client.
detail mac-addr
Displays location path loss measurement (CCX S60) configuration.plm
Displays location-based system statistics.statistics
Displays location-based system summary information.summary
Displays the RFID tag tracking information.rfid
Displays the summary of RFID tags that are clients.client
Displays the configuration options for RFID tag tracking.config
Displays the detailed information for one rfid tag.
detail MAC-addr
Displays summary information for all known rfid tags.summary
Command Default
No default behavior or values.
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples
The following is sample output from the show location plm command:
Device# show location plm
Location Path Loss Configuration
Calbration client : Disabled, Radio: Multiband
Normal clients : Disabled
Burst interval : 60
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
961
show location
To Next Page
Loading...
Need help?
General
