Cisco Catalyst 3650 Series User Manual

Examples
This example shows how to set the learning method to learn the address on the physical port within the
EtherChannel:
Device(config-if)# pagp learn-method physical-port
This example shows how to set the learning method to learn the address on the port channel within the
EtherChannel:
Device(config-if)# pagp learn-method aggregation-port
You can verify your settings by entering the show running-config privileged EXEC command or the show
pagp channel-group-number internal privileged EXEC command.
Related Commands
DescriptionCommand
Selects a port over which all traffic through the EtherChannel is sent.
pagp port-priority
Displays Port Aggregation Protocol (PAgP) channel-group information.
show pagp
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
315
pagp learn-method

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)