Examples
This example shows how to statically configure a host on an interface:
Device(config)# ip igmp snooping vlan 1 static 224.2.4.12 interface
gigabitEthernet1/0/1
Configuring port gigabitethernet1/0/1 on group 224.2.4.12
You can verify your settings by entering the show ip igmp snooping privileged EXEC command.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
230
ip igmp snooping vlan static
To Next Page
Loading...
