Cisco Catalyst 3650 Series

DescriptionCommand
Defines the conditions for redistributing routes from
one routing protocol into another, or to enable policy
routing.
route-map
Enables VPN VRF selection within a route map for
policy-based routing VRF selection.
set vrf
Displays the ARP cache, in which SLIP addresses
appear as permanent ARP table entries.
show ip arp
Displays the usability status of interfaces configured
for IP.
show ip interface
Displays static and dynamic route maps.show route-map
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
174
ip address