brief
• all—Displays information for all client.
• type—Displays qsb information for the specified target type:
◦ client—Displays QoS qsb information for wireless clients
◦ port—Displays port-specific information
◦ radio—Displays QoS qsb information for wireless radios
◦ ssid—Displays QoS qsb information for wireless networks
iif_id—Displays information for the iif_ID
interface—Displays QoS qsb information for the specified interface:
• Auto-Template—Auto-template interface between 1 and 999.
• BDI—Bridge-domain interface between 1 and 16000.
• Capwap—CAPWAP interface between 0 and 2147483647.
• GigabitEthernet—GigabitEthernet interface between 0 and 9.
• InternalInterface—Internal interface between 0 and 9.
• Loopback—Loopback interface between 0 and 2147483647.
• Null—Null interface 0-0
• Port-Channel—Port-channel interface between 1 and 128.
• TenGigabitEthernet—TenGigabitEthernet interface between 0 and 9.
• Tunnel—Tunnel interface between 0 and 2147483647.
• Vlan—VLAN interface between 1 and 4094.
qsb {brief | iif_id |
interface}
Command Modes
User EXEC
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.1.1
Examples
This is an example of the output for theshow platform software fed switchswitch_numberqos qsb command
Device#sh pl so fed sw 3 qos qsb interface g3/0/2
QoS subblock information:
Name:GigabitEthernet3/0/2 iif_id:0x0000000000007b iif_type:ETHER(146)
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
674
show platform software fed switch qos qsb
To Next Page
Loading...
Need help?
General
