Cisco Catalyst 3650 Series

no debug all
To disable debugging on a switch, use the no debug all command in Privileged EXEC mode.
no debug all
Command Default
No default behavior or values.
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Release 16.1
Examples
This example shows how to disable debugging on a switch.
Device: no debug all
All possible debugging has been turned off.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
935
no debug all