Cisco Catalyst 3650 Series User Manual

mka pre-shared-key
To configure MKA MACsec on a device interface using a Pre Shared Key (PSK), use the mka pre-shared-key
key-chain key-chain name command in global configuration mode. To disable it, use the no form of this
command.
mka pre-shared-key key-chain key-chain-name
Syntax Description
Enables MACsec MKA configuration on device interfaces using
a PSK.
mka pre-shared-key key-chain
Command Default
mka pre-shared-key is disabled.
Command Modes
Interface configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Usage Guidelines
Examples
This example shows how to configure MKA MACsec on an interface using a PSK:
Switch#
Switch(config)# int G1/0/20
Switch(config-if)# mka pre-shared-key key-chain kc1
Switch(config-if)# end
Switch#
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
785
mka pre-shared-key

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)