Cisco Catalyst 3650 Series

Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
This command requires access to a RADIUS server.
We recommend that you enter the dot1x reauthentication interface configuration command before configuring
IEEE 802.1x RADIUS accounting on an interface.
Examples
This example shows how to configure IEEE 802.1x accounting:
Device(config)# aaa new-model
Device(config)# aaa accounting dot1x default start-stop group radius
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
708
aaa accounting dot1x