Cisco Catalyst 3650 Series User Manual

show platform software status control-processor
To display platform software control-processor status, use the show platform software status
control-processor command in privileged EXEC mode.
show platform software status control-processor [brief]
Syntax Description
(Optional) Displays a summary of the platform control-processor status.brief
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.1.1
Usage Guidelines
Prior to Cisco IOS XE Denali 16.3.1, the Free Memory displayed in the command output was obtained from
the underlying Linux kernel. This value was not accurate because some memory chunks that was available
for use was not considered as free memory.
In Cisco IOS XE Denali 16.3.1, the free memory is accurately computed and displayed in the Free Memory
field of the command output.
Examples
The following is sample output from the show platform memory software status control-processor command:
Switch# show platform software status control-processor
2-RP0: online, statistics updated 7 seconds ago
Load Average: healthy
1-Min: 1.00, status: healthy, under 5.00
5-Min: 1.21, status: healthy, under 5.00
15-Min: 0.90, status: healthy, under 5.00
Memory (kb): healthy
Total: 3976852
Used: 2766284 (70%), status: healthy
Free: 1210568 (30%)
Committed: 3358008 (84%), under 95%
Per-core Statistics
CPU0: CPU Utilization (percentage of time spent)
User: 4.40, System: 1.70, Nice: 0.00, Idle: 93.80
IRQ: 0.00, SIRQ: 0.10, IOwait: 0.00
CPU1: CPU Utilization (percentage of time spent)
User: 3.80, System: 1.20, Nice: 0.00, Idle: 94.90
IRQ: 0.00, SIRQ: 0.10, IOwait: 0.00
CPU2: CPU Utilization (percentage of time spent)
User: 7.00, System: 1.10, Nice: 0.00, Idle: 91.89
IRQ: 0.00, SIRQ: 0.00, IOwait: 0.00
CPU3: CPU Utilization (percentage of time spent)
User: 4.49, System: 0.69, Nice: 0.00, Idle: 94.80
IRQ: 0.00, SIRQ: 0.00, IOwait: 0.00
3-RP0: unknown, statistics updated 2 seconds ago
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
107
show platform software status control-processor

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)