Cisco Catalyst 3650 Series User Manual

show flow record
To display the status and statistics for a Flexible NetFlow flow record, use the show flow record command
in privileged EXEC mode.
show flow record [broker [detail| picture]| [name] record-name]
Syntax Description
(Optional) Displays information about the state of the broker for the Flexible
NetFlow flow record.
broker
(Optional) Displays detailed information about the flow record broker.detail
(Optional) Displays a picture of the broker state.picture
(Optional) Specifies the name of a flow record.name
(Optional) Name of a user-defined flow record that was previously configured.
record-name
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples
The following example displays the status and statistics for FLOW-RECORD-1:
Device# show flow record FLOW-RECORD-1
flow record FLOW-RECORD-1:
Description: User defined
No. of users: 0
Total field space: 24 bytes
Fields:
match ipv6 destination address
match transport source-port
collect interface input
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
471
show flow record

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)