Cisco Catalyst 3650 Series User Manual

Policy Map pm3
Class cm-3
set dscp 4
Class cm-4
set precedence 5
Class class-default
set dscp af11
Related Commands
DescriptionCommand
Creates a class map to be used for matching packets to the class whose name
you specify and enters class-map configuration mode.
class-map
Creates or modifies a policy map that can be attached to multiple physical ports
or SVIs and enters policy-map configuration mode.
policy-map
Displays QoS policy maps.
show policy-map
Classifies IP traffic by setting a DSCP or an IP-precedence value in the packet.
set
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
644
class

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)