qsb ptr:0xffd8573350
Port type = Wired port
asic_num:0 is_uplink:false init_done:true
FRU events: Active-0, Inactive-0
def_qos_label:0 def_le_priority:13
trust_enabled:false trust_type:TRUST_DSCP ifm_trust_type:1
LE priority:13 LE trans_index(in, out): (0,0)
Stats (plc,q) export counters (in/out): 0/0
Policy Info:
Ingress Policy: pmap::{(0xffd8685180,AutoQos-4.0-CiscoPhone-Input-Policy,1083231504,)}
tcg::{0xffd867ad10,GigabitEthernet3/0/2 tgt(0x7b,IN) level:0 num_tccg:4 num_child:0},
status:VALID,SET_INHW
Egress Policy: pmap::{(0xffd86857d0,AutoQos-4.0-Output-Policy,1076629088,)}
tcg::{0xffd8685b40,GigabitEthernet3/0/2 tgt(0x7b,OUT) level:0 num_tccg:8 num_child:0},
status:VALID,SET_INHW
TCG(in,out):(0xffd867ad10, 0xffd8685b40) le_label_id(in,out):(2, 1)
Policer Info:
num_ag_policers(in,out)[1r2c,2r3c]: ([0,0],[0,0])
num_mf_policers(in,out): (0,0)
num_afd_policers:0
[ag_plc_handle(in,out) = (0xd8688220,0)]
[mf_plc_handle(in,out)=((nil),(nil)) num_mf_policers:(0,0)
base:(0xffffffff,0xffffffff) rc:(0,0)]
Queueing Info:
def_queuing = 0, shape_rate:0 interface_rate_kbps:1000000
Port shaper:false
lbl_to_qmap_index:1
Physical qparams:
Queue Config: NodeType:Physical Id:0x40000049 parent:0x40000049 qid:0 attr:0x1 defq:0
PARAMS: Excess Ratio:1 Min Cir:1000000 QBuffer:0
Queue Limit Type:Single Unit:Percent Queue Limit:44192
SHARED Queue
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
675
show platform software fed switch qos qsb
To Next Page
Loading...
