Table 9: show power inline police Field Descriptions
DescriptionField
The total amount of configured power
2
on the switch
in watts (W).
Available
The amount of configured power allocated to PoE
ports in watts.
Used
The amount of configured power in watts that is not
allocated to ports in the system. (Available – Used =
Remaining)
Remaining
Administration mode: auto, off, static.Admin State
Operating mode:
• errdisable—Policing is enabled.
• faulty—Device detection on a powered device
is in a faulty state.
• off—No PoE is applied.
• on—The powered device is detected, and power
is applied.
• power-deny—A powered device is detected,
but no PoE is available, or the real-time power
consumption exceeds the maximum power
allocation.
The operating mode is the current PoE state
for the specified PoE port, the specified stack
member, or for all PoE ports on the switch.
Note
Oper State
Status of the real-time power-consumption policing
feature:
• errdisable—Policing is enabled, and the switch
shuts down the port when the real-time power
consumption exceeds the maximum power
allocation.
• log—Policing is enabled, and the switch
generates a syslog message when the real-time
power consumption exceeds the maximum
power allocation.
• none—Policing is disabled.
Admin Police
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
119
show power inline
To Next Page
Loading...
Need help?
General
