Cisco Catalyst 3650 Series User Manual

show cisp
To display CISP information for a specified interface, use the show cisp command in privileged EXEC mode.
show cisp {[clients | interface interface-id] | registrations | summary}
Syntax Description
(Optional) Display CISP client details.clients
(Optional) Display CISP information about the specified interface. Valid
interfaces include physical ports and port channels.
interface interface-id
Displays CISP registrations.registrations
(Optional) Displays CISP summary.summary
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
This command was reintroduced.
This command was not supported
in Cisco IOS XE Denali 16.1.x and
Cisco IOS XE Denali 16.2.x
Cisco IOS XE Denali 16.3.1
Examples
This example shows output from the show cisp interface command:
Device# show cisp interface fast 0
CISP not enabled on specified interface
This example shows output from the show cisp registration command:
Device# show cisp registrations
Interface(s) with CISP registered user(s):
------------------------------------------
Fa1/0/13
Auth Mgr (Authenticator)
Gi2/0/1
Auth Mgr (Authenticator)
Gi2/0/2
Auth Mgr (Authenticator)
Gi2/0/3
Auth Mgr (Authenticator)
Gi2/0/5
Auth Mgr (Authenticator)
Gi2/0/9
Auth Mgr (Authenticator)
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
813
show cisp

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)