Cisco Catalyst 3650 Series User Manual

Examples
The following example shows how to specify a key to identify authentication on a key-chain:
Device(config-keychain)# key 1
Related Commands
DescriptionCommand
Sets the time period during which the authentication
key on a key chain is received as valid.
accept-lifetime
Defines an authentication key chain needed to enable
authentication for routing protocols.
key chain
Specifies the authentication string for a key.key-string (authentication)
Sets the time period during which an authentication
key on a key chain is valid to be sent.
send-lifetime
Displays authentication key information.show key chain
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
186
key

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)