Cisco Catalyst 3650 Series User Manual

show autonomic intent
To verify the configured intent range, use the show autonomic intent command in privileged EXEC mode.
show autonomic intent
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Usage Guidelines
Intent is automatically sent to all nodes in an autonomic domain. So, every node should show the same intent
Examples
To display information about the configured intent range:
Device# show autonomic intent
Intent File : Available
Version Num : 1443520505 (Parsed)
Version Time: 2015-09-29 09:55:05 UTC
Outer Vlans : 30-35,40,45
Outer Vlans count : 8
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
898
show autonomic intent

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)