Cisco Catalyst 3650 Series User Manual

clear vmps statistics
To clear the VLAN Membership Policy Server (VMPS) statistics maintained by the VLAN Query Protocol
(VQP) client, use the clear vmps statistics command in privileged EXEC mode.
clear vmps statistics
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Examples
This example shows how to clear VLAN Membership Policy Server (VMPS) statistics:
Device# clear vmps statistics
You can verify that information was deleted by entering the show vmps statistics privileged EXEC command.
Related Commands
DescriptionCommand
Displays the VQP version, reconfirmation interval, retry count, VMPS IP
addresses, and the current and primary servers.
show vmps
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
1006
clear vmps statistics

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)