Transport Protocol: UDP
Destination Port: 9995
Source Port: 55864
DSCP: 0x0
TTL: 255
Output Features: Used
This table describes the significant fields shown in the display:
Table 23: show flow exporter Field Descriptions
DescriptionField
The name of the flow exporter that you configured.Flow Exporter
The description that you configured for the exporter,
or the default description User defined.
Description
The transport configuration fields for this exporter.Transport Configuration
The IP address of the destination host.Destination IP address
The source IP address used by the exported packets.Source IP address
The transport layer protocol used by the exported
packets.
Transport Protocol
The destination UDP port to which the exported
packets are sent.
Destination Port
The source UDP port from which the exported packets
are sent.
Source Port
The differentiated services code point (DSCP) value.DSCP
The time-to-live value.TTL
Specifies whether the output-features command,
which causes the output features to be run on Flexible
NetFlow export packets, has been used or not.
Output Features
The following example displays the status and statistics for all of the flow exporters configured on a device:
Device# show flow exporter name FLOW-EXPORTER-1 statistics
Flow Exporter FLOW-EXPORTER-1:
Packet send statistics (last cleared 2w6d ago):
Successfully sent: 0 (0 bytes)
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
463
show flow exporter
To Next Page
Loading...
Need help?
General
