Cisco Catalyst 3650 Series

This command is available only on switch stacks running the IP Base or IP Services feature set.Note
Examples
This is an example of setting the power priority for switch 1 in power stack a to 7, for the high-priority ports
to 11, and for the low-priority ports to 20.
Device(config)# stack-power switch 1
Device(config-switch-stackpower)# stack-id power_stack_a
Device(config-switch-stackpower)# power-priority high 11
Device(config-switch-stackpower)# power-priority low 20
Device(config-switch-stackpower)# power-priority switch 7
Device(config-switch-stackpower)# exit
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
59
power-priority