Cisco Catalyst 3650 Series

clear location
To clear a specific radio frequency identification (RFID) tag or all of the RFID tags information in the entire
database, use the clear location command in EXEC mode.
clear location [mac-address mac-address | rfid]
Syntax Description
MAC address of a specific RFID tag.
mac-address mac-address
Specifies all of the RFID tags in the database.rfid
Command Default
No default behavior or values.
Command Modes
User EXEC
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples
This example shows how to clear information about all of the RFID tags in the database:
Device> clear location rfid
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
909
clear location