Cisco Catalyst 3650 Series User Manual

service-policy-query
To configure service list query periodicity, use the service-policy-query command. To delete the configuration,
use the no form of this command.
service-policy-query [service-list-query-name service-list-query-periodicity]
no service-policy-query
Syntax Description
(Optional) Configures the service list query
periodicity.
service-list-query-name service-list-query-periodicity
Command Default
Disabled.
Command Modes
mDNS configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
As there are devices that do not send unsolicited announcements and to force learning of services and to keep
them refreshed in the cache, this command contains an active query feature which ensures that services listed
in the active query list will be queried.
Examples
This example shows how to configure service list query periodicity:
Device(config-mdns)# service-policy-query sl-query1 100
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
248
service-policy-query

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)