Cisco Catalyst 3650 Series

exit
To return to the previous mode or exit from the CLI EXEC mode, use the exit command.
exit
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
Privileged EXEC
Global configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples
This example shows how to exit the configuration mode:
Device(config)# exit
Device#
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
920
exit