show platform vlan
To display platform-dependent VLAN information, use the show platform vlan privileged EXEC command.
show platform vlan [vlan-id] [switch switch-number]
Syntax Description
(Optional) ID of the VLAN. The range is 1 to 4094.
vlan-id
(Optional) Limits the display to VLANs on the specified stack member.
switch switch-number
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks you
to do so.
Examples
This example shows how to display platform-dependent VLAN information:
Device# show platform vlan
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
1031
show platform vlan
To Next Page
Loading...
