Cisco Catalyst 3650 Series

You can verify your settings by entering the show policy-map privileged EXEC command.
Related Commands
DescriptionCommand
Defines a traffic classification match criteria for the specified class-map
name.
class
Creates a class map to be used for matching packets to the class whose
name you specify and enters class-map configuration mode.
class-map
Applies a policy map to a physical port or an SVI.
service-policy (Wired)
Displays QoS policy maps.
show policy-map
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
653
policy-map