Cisco Catalyst 3650 Series User Manual

• envmon—Sends environmental monitor traps.
• errdisable—Sends SNMP errdisable notification traps.
• event-manager—Sends SNMP Embedded Event Manager traps.
• flash—Sends SNMP FLASH notifications.
• flowmon—Sends SNMP flowmon notification traps.
• ipmulticast—Sends SNMP IP multicast routing traps.
• ipsla—Sends SNMP IP SLA traps.
• license—Sends license traps.
• local-auth—Sends SNMP local auth traps.
• mac-notification—Sends SNMP MAC notification traps.
• pim—Sends SNMP Protocol-Independent Multicast (PIM) traps.
• power-ethernet—Sends SNMP power Ethernet traps.
• snmp—Sends SNMP-type traps.
• storm-control—Sends SNMP storm-control traps.
• stpx—Sends SNMP STP extended MIB traps.
• syslog—Sends SNMP syslog traps.
• transceiver—Sends SNMP transceiver traps.
• tty—Sends TCP connection traps.
• vlan-membership— Sends SNMP VLAN membership traps.
• vlancreate—Sends SNMP VLAN-created traps.
• vlandelete—Sends SNMP VLAN-deleted traps.
• vrfmib—Sends SNMP vrfmib traps.
• vtp—Sends SNMP VLAN Trunking Protocol (VTP) traps.
Command Default
This command is disabled by default. No notifications are sent.
If you enter this command with no keywords, the default is to send all trap types to the host. No informs are
sent to this host.
If no version keyword is present, the default is Version 1.
If Version 3 is selected and no authentication keyword is entered, the default is the noauth (noAuthNoPriv)
security level.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
562
snmp-server host

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)