Cisco Catalyst 3650 Series User Manual

show fabric domain
show fabric domain
Command Default
Default domain and default context
Command Modes
Privileged Exec
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Usage Guidelines
Use the command to display a summary of the fabric domain. The following is sample output for an edge
device.
device#show fabric domain
Fabric Domain : "default"
Role : Edge
Control-Plane Service: Disabled
Number of "Control-Plane" node(s): 2
IP Address Auth-key
---------------------------------
192.168.1.4 example-key1
192.168.1.5 example-key2
Number of "Border" node(s): 1
IP Address
---------------
192.168.1.6
Number of context(s): 2
Codes: * - Not Configured
Name ID Host-pools
------------------------------------------------
default 0 *
example-context 10 1
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
22
show fabric domain

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)