Cisco Catalyst 3650 Series User Manual

DescriptionField
Number of (S, G) pairs that are reusing this data
MDT.
ref_count:13
Number of interfaces out of which this multicast data
is being forwarded.
OIF count:1
Information about the entry.
•
A--candidate Multicast Source Discovery
Protocol (MSDP) advertisement
•
B--bidirectional group
•
D--dense
•
C--connected
•
F--register flag
•
I--received source-specific host report
•
J--join shortest path source tree (SPT)
•
L--local
•
M--MSDP created entry
•
P--pruned
•
R--RP bit set
•
S--sparse
•
s--Source Specific Multicast (SSM) group
•
T--SPT bit set
•
X--proxy join timer running
•
U--URL Rendezvous Directory (URD)
•
Y--joined MDT data group
•
y--sending to MDT data group
•
Z--multicast tunnel
flags:
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
399
show ip pim mdt receive

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)