Cisco Catalyst 3650 Series User Manual

show module
To display module information such as switch number, model number, serial number, hardware revision
number, software version, MAC address and so on, use this command in user EXEC or privileged EXEC
mode.
show module [switch-num]
Syntax Description
(Optional) Number of the switch.
switch-num
Command Default
None
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.1.1
Usage Guidelines
Entering the show module command without the switch-num argument is the same as entering the show
module all command.
Examples
This example shows how to display information for all the modules on a Cisco Catalyst 3850 Series switch:
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
92
show module

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)