Cisco Catalyst 3650 Series User Manual

show autonomic device
To display the autonomic device information, use the show autonomic device command in privileged EXEC
mode.
show autonomic device
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Examples
To display the autonomic device information:
Device# show autonomic device
Status Enabled
Type Autonomic Node
UDI PID:WS-C3650-24TD SN:FDO1942E1YK
Device ID e865.493b.acfb-7
Domain ID cisco.com
Domain Certificate (sub:) ou=cisco.com+serialNumber=PID:WS-C3650-24TD
SN:FDO1942E1YK,cn=e865.493b.acfb-7
Certificate Serial Number 09
Device Address FD08:2EEF:C2EE:0:E865:493B:ACFB:7
Domain Cert is Valid
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
895
show autonomic device

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)