Cisco Catalyst 3650 Series User Manual

snmp-server enable traps stackwise
To enable SNMP StackWise traps, use the snmp-server enable traps stackwise command in global
configuration mode. Use the no form of this command to return to the default setting.
snmp-server enable traps stackwise [GLS][ILS][SRLS] [insufficient-power][invalid-input-current]
[invalid-output-current][member-removed][member-upgrade-notification] [new-master][new-member]
[port-change][power-budget-warning][power-invalid-topology]
[power-link-status-changed][power-oper-status-changed]
[power-priority-conflict][power-version-mismatch][ring-redundant]
[stack-mismatch][unbalanced-power-supplies][under-budget][under-voltage]
no snmp-server enable traps stackwise [GLS][ILS][SRLS] [insufficient-power][invalid-input-current]
[invalid-output-current][member-removed][member-upgrade-notification] [new-master][new-member]
[port-change][power-budget-warning][power-invalid-topology]
[power-link-status-changed][power-oper-status-changed]
[power-priority-conflict][power-version-mismatch][ring-redundant]
[stack-mismatch][unbalanced-power-supplies][under-budget][under-voltage]
Syntax Description
(Optional) Enables StackWise stack power GLS trap.GLS
(Optional) Enables StackWise stack power ILS trap.ILS
(Optional) Enables StackWise stack power SRLS trap.SRLS
(Optional) Enables StackWise stack power unbalanced power supplies
trap.
insufficient-power
(Optional) Enables StackWise stack power invalid input current trap.invalid-input-current
(Optional) Enables StackWise stack power invalid output current
trap.
invalid-output-current
(Optional) Enables StackWise stack member removed trap.member-removed
(Optional) Enables StackWise member to be reloaded for upgrade
trap.
member-upgrade-notification
(Optional) Enables StackWise new master trap.new-master
(Optional) Enables StackWise stack new member trap.new-member
(Optional) Enables StackWise stack port change trap.port-change
(Optional) Enables StackWise stack power budget warning trap.power-budget-warning
(Optional) Enables StackWise stack power invalid topology trap.power-invalid-topology
(Optional) Enables StackWise stack power link status changed trap.power-link-status-changed
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
552
snmp-server enable traps stackwise

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)