show env xps
To display budgeting, configuration, power, and system power information for the Cisco eXpandable Power
System (XPS) 2200, use the show env xps command in privileged EXEC mode.
show env xps { budgeting | configuration | port [ all | number ] | power | system | thermal | upgrade |
version }
Syntax Description
Displays XPS power budgeting, the allocated and budgeted
power of all switches in the power stack.
budgeting
Displays the configuration resulting from the power xps
privileged EXEC commands. The XPS configuration is
stored in the XPS. Enter the show env xps configuration
command to retrieve the non-default configuration.
configuration
Displays the configuration and status of all ports or the
specified XPS port. Port numbers are from 1 to 9.
port [all | number ]
Displays the status of the XPS power supplies.power
Displays the XPS system status.system
Displays the XPS thermal status.thermal
Displays the XPS upgrade status.upgrade
Displays the XPS version details.version
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.12.2(55)SE1
Usage Guidelines
Use the show env xps privileged EXEC command to display the information for XPS 2200.
Examples
This is an example of output from the show env xps budgeting command:
Switch#
=======
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
950
show env xps
To Next Page
Loading...
Need help?
General
