Cisco Catalyst 3650 Series

auto qos voip cisco-phone
This is an example of output from the show auto qos interface interface-id command when the auto qos
voip cisco-phone interface configuration command is entered:
Device# show auto qos interface gigabitethernet1/0/2
GigabitEthernet1/0/2
auto qos voip cisco-phone
These are examples of output from the show auto qos interface interface-id command when auto-QoS is
disabled on an interface:
Device# show auto qos interface gigabitethernet3/0/1
AutoQoS is disabled
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
639
show auto qos